Whatsup good people. This is Shane.
So, I was setting up a tank for Duncan Trussell this last week and I was going for the ULTIMATE install. I've learned a lot in the last few years and I've picked up some ways to do it better. The install turned out PERFECT and this is what I did below. We are working to make some of the things available in the stock Float Tent package but for now you'll have to do it on your own.
Tips for the Ultimate Setup:
1. Secure the inside light caps - Every Float Tent comes with a patch kit, which has some super glue with it. I decided, instead of climbing in the tank after it's built to secure the light cap I would just glue it on before putting the cover on. I used a couple of small dabs of glue on the outside of the cap, stuck it in place, and BAM. No more trying to install these babies after the fact. Much easier AND they won't fall off ever!
2. Secure your poles - Sometimes the poles in the door get out of place, it can get irritating. I picked up some 3M mounting foam tape on amazon, and applied a small 1/2" x 2"" piece to the poles that moved. Then slid them in the sheeth and pressed it together. The poles stayed TOTALLY in place. Awesome hack! I should warn you, make sure to get in the tank before securing the poles to make sure there are no light leaks. Once everything is pitch black, hop out and tape the poles.
Here's a link where you can buy the: M
3. Tidy up all the cables easily - I just picked up a white cable box, which seems like it wouldn't be a big deal but trust me IT IS. It made the install so nice and tidy. Here is a link to the box on amazon, and some picture of how it looked when I used it. It looked so LEGIT that we're looking into getting a ZEN cable box made. They are so cool!
Link: Cable Box
Those are my favorite tricks for the perfect Float Tent install. Even if they seem like "no big deal" ... trust me, they are. When your Float Tank is installed nice, clean, and easy, you'll enjoy it more.