Float Tank Corner Piece Installation

After a couple months of testing our production sample we have found that a small percentage of tanks get condensation buildup in the corners. In an effort to prevent any tank from ever having issues we are asking everyone to put small patches on the inside corners of the tank. Without assembling these final pieces there is a chance condensation could escape. Installing the patches is very simple and will not take long.

Below are two videos: the first, is a message from our owner, Shane Stott, with a quick explanation of this installation process. The second is a full instructional video, along with a printable PDF of the step-by-step instructions.

These videos will show you everything you need to know to get this done.

If you have ANY issues, concerns, or questions please don’t hesitate to call us:

801-871-5140 or info@zenfloatco.com


A Quick Explanation Of The Corner Piece Installation:

 
 

Step-By-Step Instructions To Install Vinyl Corner Pieces:

 
 

To download + print step-by-step instructions, click here


Step-By-Step Installation Instructions

Things to note:

  • Remove shoes or any sharp objects before entering tank

  • Do not puncture the tank

Tank Patch Instructions copy.jpg

What you will need:

  1. 4 Vinyl corner pieces, size is 2.5” x 4.5”

  2. Vinyl repair glue

  3. Vinyl glue brush

  4. Valve tool (That is what Shane calls it in the video)

  5. Hair dryer

  6. Pen/Marker

  7. Cardboard piece or paper plate

All of these items will be sent you to with your tank package, the only item you will need to provide yourself is a hair dryer or heat gun.





Step 1: Place 1 patch onto the corner of the tank, and trace an outline of the patch in desired location

IMG_2735.JPG
IMG_2734.JPG
IMG_2736.JPG
 

Step 2: Place a half dollar size amount of vinyl repair glue onto cardboard piece or paper plate

 
IMG_2737.JPG
 

Step 3: Brush glue onto the tank area that you outlined in step 2, and onto the vinyl corner piece

The corner area of the tank and the vinyl corner piece should be completely covered in glue

 
IMG_2738.JPG
IMG_2739.JPG
 

Step 4: Use the hair dryer to dry the glue on the corner and the vinyl corner piece

You will know it is done when the repair glue loses shine and becomes tacky

 
IMG_2741.JPG
IMG_2742.JPG
 

Step 5: Gently fold the vinyl corner piece and line the center to the center of the outlined area of the tank

The most important part to seal is the top and bottom along the corner. Make sure those areas are completely sealed

 
 

Step 6: Use the valve tool to press down the patch onto the tank

 
IMG_2746.JPG
 

Step 7: Let the glue fully dry for 24 hours before tank use and before you fill the tank with water

 
IMG_2756.JPG
 

To download & print a copy of these instructions, CLICK HERE.

If you have ANY issues, questions or concerns, please reach out:

Phone: 801-871-5140 or Email: info@zenfloatco.com